A leak beside a wall, chimney or roof opening can involve the flashing that directs water past that joint. We help Shawnee homeowners understand the failed connection and the roofing or wall materials that need to be opened to repair it properly. Start with a free roof inspection.
Free roof inspections. A roofer walks the roof and helps explain the work it needs.
Flashing is the metal and related water-control detail where the roof meets something else. Along a wall, at a chimney or around a pipe, it connects the sloped covering to a vertical surface or opening. Its overlaps direct water back onto the roof instead of letting it behind the joint.
When flashing pulls away, splits or no longer connects correctly with the layers around it, rain can get behind that protection. Adding sealant over the visible edge does not necessarily restore the missing overlap beneath the shingles or siding.
The repair begins with the actual entry point. An indoor stain near a chimney can still involve water arriving from farther upslope. We look at the flashing and adjoining covering before treating the nearby feature as the proven cause.
Different joints need different flashing details. The repair has to follow that joint through its layers, not simply cover a visible gap.
Step flashing follows the courses beside a sloped roof; the upper connection is protected by the wall’s drainage layer or counterflashing. A lasting repair needs both sides of that connection to work. Siding or masonry interfaces can widen what must be opened.
A kick-out diverter turns water away from the wall at the bottom of a roof-to-wall intersection. If that transition is missing or poorly connected, runoff can pass behind the wall finish instead of reaching the intended drainage route. The repair needs the roof and wall layers integrated together.
A pipe has a boot and base that connect to the roof covering. A skylight uses compatible flashings matched to its mounting and roof. A split collar and failed skylight flashing are distinct repairs; skylight repair also separates flashing problems from the condition of the unit itself.
Flashing repair can involve more material than the visible strip of metal. Access to the connection and the condition of what lies behind it determine that work.
We inspect the likely water path and open the amount of covering needed to understand the failed detail. Where flashing runs behind siding or counterflashing, that upper connection is part of the repair question too.
Damaged deck, underlayment or wall materials change the scope. The new flashing needs sound support and correct integration with retained water-control layers. Repairing the metal alone leaves an incomplete job if those connections have failed.
Compatible flashing, covering and upper protection are reconnected for the actual roof detail. The work is meant to route water through proper overlaps, with sealants used only where the selected detail calls for them.
Roof replacement is a useful time to address flashings because the adjoining covering is being removed. Existing metal should not be assumed reusable simply because it is still present. Its condition, shape and connection to the new roof system determine whether it can remain.
A roof-to-wall detail can also involve work behind siding or at a chimney’s counterflashing. Those interfaces need to be included in the replacement scope where required. New shingles laid beside an unresolved flashing joint do not correct that joint.
The full roof replacement scope includes underlayment, support, edges and ventilation along with covering and flashing.
Yes, when the adjoining roofing and support allow the required detail to be opened and reconnected. Siding, masonry or damaged deck can extend the work. The extent of the failed joint matters more than the amount of metal visible from the ground.
Not by itself. The failed connection needs to be identified. Step flashing, counterflashing, masonry and adjoining roofing each have a role, and a bead of sealant does not replace missing or incorrectly integrated flashing.
No. It is a clue to where water is appearing, but water can travel before reaching the room. The inspection follows the likely path and examines the wall joint and nearby roofing rather than assuming the location proves the cause.
The joint may need roofing, siding or counterflashing opened so its layers can be rebuilt. Hidden deck or wall damage can add work as well. Roof repair cost follows the physical access and layers involved, not only the visible size of the leak.
Tell us where water is showing and whether it is near a wall, chimney, pipe or skylight. A free roof inspection helps identify the actual connection and the repair it needs.
(913) 354-3947